AGRICULTURE
Allied Vision Mako G-319C
Mako G-319C is a GigE machine vision camera that incorporates the high-quality Type 1/1.8 (8.9 mm diagonal) Sony IMX265 CMOS sensor with Pregius global shutter. At full resolution, this camera runs 37.5 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have an ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), three optoisolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. ROS Drivers Available.
Allied Vision Mako G-319C Datasheet
Image optimization features:
- Auto gain (manual gain control: 0 to 40 dB; 0.1 dB increments)
- Auto exposure (exposure time control varies by pixel format)
- Auto white balance (color models only)
- Binning
- Color correction, hue, saturation (color models only)
- Decimation
- Gamma correction
- One look-up table (LUT)
- Region of interest (ROI), separate ROI for auto features
Camera control features:
- Event channel
- Image chunk data
- Global shutter mode
- Storable user sets
- StreamBytesPerSecond (easy bandwidth control)
- Stream hold
- Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
- Temperature monitoring (main board only)
| Interface | IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE) |
|---|---|
| Resolution | 2064 (H) × 1544 (V) |
| Sensor | Sony IMX265 |
| Sensor type | CMOS |
| Shutter mode | Global shutter |
| Sensor Size | Type 1/1.8 |
| Cell size | 3.45 μm × 3.45 μm |
| Lens mount | C-Mount |
| Frame rate | 37.6 fps |
| ADC | 12 Bit |
| Image buffer (RAM) | 64 |
Mako G-319B/G-319C is suitable for a wide range of applications including:
- Robotics
- Quality control
- Inspection, surveillance
- Industrial imaging
- Machine vision
- Logistics